UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

For the fiscal year ended June 30, 2017

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.

Yes o No x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act.

Yes o No x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.

Yes x No o

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).

Yes  x No o

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.

x

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. o

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).

Yes o No x

The aggregate market value as of December 31, 2016 of the registrant’s common stock, the only class of voting or non-voting common equity of the registrant, held by non-affiliates of the registrant was approximately $48,473,515, based on the closing price of the registrant’s common stock on the NYSE American (formerly the NYSE MKT) on that date.

The number of outstanding shares of the registrant’s common stock as of September 25, 2017 was 10,467,713.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the registrant’s Proxy Statement relating to its 2017 Annual Meeting of Stockholders are incorporated by reference into Part III of this Form 10-K.

TABLE OF CONTENTS

FORWARD LOOKING STATEMENTS

Certain statements in this Report are “forward looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. When used in this Report, words such as “may,” “should,” “seek,” “believe,” “expect,” “anticipate,” “estimate,” “project,” “intend,” “strategy” and similar expressions are intended to identify forward looking statements regarding events, conditions and financial trends that may affect the future plans, operations, business, strategies, operating results and financial position of EnviroStar, Inc. (which is referred to within this Report, collectively with its subsidiaries (unless the context otherwise requires), as the “Company”). Forward looking statements are subject to a number of known and unknown risks and uncertainties that may cause actual results, trends, performance or achievements of the Company, or industry trends and results, to differ materially from the future results, trends, performance or achievements expressed or implied by such forward looking statements. These risks and uncertainties include, among others, those associated with: general economic and business conditions in the United States and other countries where the Company operates or where the Company’s customers and suppliers are located; industry conditions and trends; technology changes; competition, including the Company’s ability to compete effectively and the impact that competition may have on prices which the Company may charge for its products and on the Company’s profit margins; the availability and cost of inventory purchased by the Company; the relative value of the United States dollar to currencies in the countries in which the Company’s customers, suppliers and competitors are located; changes in, or the failure to comply with, government regulation, including environmental regulations; the Company’s ability to implement its business and growth strategies and plans, including changes thereto; the availability, terms and deployment of debt and equity capital if needed for expansion or otherwise; risks relating to the Company’s relationships with its principal suppliers and customers, including the impact of the loss of any such relationship; risks relating to the timing of shipments of customers’ orders and the Company’s recognition of revenue relating thereto; risks and uncertainties associated with the Company’s pursuit of acquisitions and other strategic opportunities, including, without limitation, that the Company may not be successful in identifying or consummating acquisitions or other strategic opportunities, integration risks, risks related to indebtedness incurred by the Company in connection with financing acquisitions, dilution experienced by the Company’s existing stockholders as a result of the issuance of shares of the Company’s common stock in connection with acquisitions, risks that the Company’s goals or expectations with respect to acquisitions and other strategic transactions may not be met and acquisitions subject to agreements which have been entered into but which have not yet closed may not be consummated on the contemplated terms, when expected, or at all; and other economic, competitive, governmental, technological and other risks and factors discussed elsewhere in this Report, including, without limitation, in the “Risk Factors” section hereof, and in the Company’s other periodic filings with the Securities and Exchange Commission (the “SEC”). Many of these risks and factors are beyond the Company’s control. In addition, past performance and perceived trends may not be indicative of future results. The Company cautions that the foregoing factors are not exclusive. The Company expressly disclaims any obligation to update or revise any forward looking statements, whether as a result of new information, future events or otherwise, except as required by law.

PART I

Item 1. Business.

General

The Company was incorporated under the laws of the State of Delaware on June 13, 1963 under the name Metro-Tel Corp. and changed its name to DRYCLEAN USA, Inc. on November 7, 1999. On December 1, 2009, the Company changed its name to EnviroStar, Inc.

The Company, through its wholly-owned subsidiaries:

These activities are conducted in the United States, Canada, the Caribbean and Latin America. Historically, the Company’s operations related to these activities consisted solely of the business and operations of Steiner-Atlantic Corp. (“Steiner-Atlantic”), a wholly-owned subsidiary of the Company.

On October 10, 2016, the Company, through its wholly-owned subsidiary, Western State Design, Inc., (“Western State Design”), completed the acquisition (the “Western State Design Acquisition”) of substantially all the assets of Western State Design, LLC, a California-based distributor of commercial and industrial laundry equipment and related parts for new laundry facilities and to the replacement laundry market. In addition, on June 19, 2017, the Company, through its wholly-owned subsidiary, Martin-Ray Laundry Systems, Inc. (“Martin-Ray”), completed the acquisition (the “Martin-Ray Acquisition”) of substantially all the assets of Martin-Ray Laundry Systems, Inc., a Colorado-based distributor of commercial and industrial laundry equipment and related parts for new laundry facilities and to the replacement laundry market. See “Buy and Build Growth Strategy” below for additional information regarding these acquisitions.

In addition, the Company, through DRYCLEAN USA License Corp., an indirect wholly-owned subsidiary of the Company, owns the worldwide rights to the name DRYCLEAN USA® and licenses the right to use such name for a fee to retail dry cleaners in the United States, the Caribbean and Latin America.

The Company reports its results of operations through a single reportable segment, which includes the operations of Steiner-Atlantic as well as the operations of Western State Design since the closing of the Western State Design Acquisition on October 10, 2016 and the operations of Martin-Ray since the closing date of the Martin-Ray Acquisition on June 19, 2017.

Available Information

The Company files Annual Reports on Form 10-K and Quarterly Reports on Form 10-Q, files or furnishes Current Reports on Form 8-K, files or furnishes amendments to those reports, and files proxy and information statements with the SEC. These reports and statements may be read and copied at the SEC’s Public Reference Room at 100 F Street, N.E., Washington, DC 20549. You may obtain information on the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330. These reports and statements, as well as beneficial ownership reports filed by the Company’s officers and directors and beneficial owners of 10% or more of the Company’s common stock, may also be accessed free of charge on the SEC’s website at http://www.sec.gov and, as soon as reasonably practicable after such materials are filed with, or furnished to, the SEC, on the Company’s website at http://www.envirostarinc.com.

Products

The Company sells an extensive line of commercial and industrial laundry and dry cleaning equipment and steam and hot water boilers manufactured by others, as well as related replacement parts and accessories, and provides installation and maintenance services.

The commercial and industrial laundry equipment distributed by the Company includes washroom, finishing, material handling, and mechanical equipment such as washers and dryers, tunnel systems and coin-operated machines, many of which are designed to reduce utility and water consumption. Finishing equipment distributed by the Company includes sheet feeders, flatwork ironers, automatic sheet folders, and stackers. Material handling equipment distributed by the Company includes

conveyor and rail systems. Mechanical equipment distributed by the Company includes boilers, hot water/steam systems, water reuse systems and air compressors.

The dry cleaning equipment distributed by the Company includes commercial dry cleaning machines, most of which are designed to be environmentally friendly by not using perchloroethylene (“Perc”) in the dry cleaning process, and therefore eliminating the health and environmental concerns that Perc poses. This line of products also includes garment presses, finishing equipment, sorting and storage conveyors and accessories.

Boiler products consist of high efficiency, low emission steam boilers, steam systems and hot water systems that are used in the laundry and dry cleaning industry for temperature control, heating, pressing and de-wrinkling, and in the healthcare industry, food and beverage industry, HVAC industry and in other industrial markets for sterilization, product sealing and other purposes.

The Company also sells replacement parts and accessories for the products it sells and provides installation and maintenance services to its customers.

The Company seeks to position and price the products that it sells to appeal to customers in each of the high-end, mid-range and value-priced markets, as the products are generally offered in a wide range of price points to address the needs of a diverse customer base. The Company believes that the portfolio of products that it sells affords the Company’s customers a “one-stop shop” for commercial, industrial and vended laundry and dry cleaning machines, boilers and accessories and that, as a result, the Company is able to attract and support potential customers who can choose from the Company’s broad product line.

Buy-and-Build Growth Strategy

The Company intends to grow using a “buy-and-build” strategy. The “buy” component of the strategy includes the consideration and pursuit of acquisitions and other strategic transactions that would complement the Company’s existing business or that might otherwise offer growth opportunities for, or benefit, the Company. The Company is disciplined and conservative in its consideration of acquisitions and generally seeks to identify opportunities that fit certain financial and strategic criteria. The “build” component of the strategy involves implementing a growth culture at acquired businesses based on the exchange of ideas and business concepts among the management teams of the Company and the acquired businesses as well as through certain additional initiatives, which may include investments in new locations, additional product lines, expanded service capabilities and advanced technologies. The Company generally seeks to structure acquisitions to include both cash and stock consideration. The Company believes the issuance of stock consideration aligns the interests of the sellers of the acquired businesses, who the Company seeks to maintain to continue to operate the acquired businesses, with those of our other stockholders. The sellers as well as other key individuals at the acquired businesses may also be provided with the opportunity to own shares of the Company’s common stock through equity-based plans of the Company.

As previously described, on October 10, 2016, the Company completed the Western State Design Acquisition pursuant to which the Company, through its wholly-owned subsidiary, Western State Design, purchased substantially all the assets of Western State Design, LLC (“WSD”), a California-based distributor of commercial and industrial laundry equipment and related parts for new laundry facilities and to the replacement laundry market, for a purchase price consisting of $18.5 million in cash and 2,044,990 shares of the Company’s common stock. The cash consideration, which included $2.8 million which was placed in escrow for no less than 18 months after the closing date (subject to extension in certain circumstances), was financed through $12.5 million of borrowings under the credit facility entered into at the time and $6.0 million of proceeds from the sale of 1,290,323 shares of the Company’s common stock to Symmetric Capital II LLC (“Symmetric Capital II”) in a private placement transaction. Henry M. Nahmad, the Company’s Chairman, Chief Executive Officer, President and controlling stockholder, is the Manager of, and may be deemed to control, Symmetric Capital II. Pursuant to the Asset Purchase Agreement, the Company, indirectly through Western State Design, also assumed certain of the liabilities of WSD.

In addition, on June 19, 2017, the Company completed the Martin-Ray Acquisition pursuant to which the Company, through its wholly-owned subsidiary, Martin-Ray, purchased substantially all of the assets and assumed certain of the liabilities of Martin-Ray Laundry Systems, Inc. (“MRLS”), a Colorado-based distributor of commercial laundry equipment. The consideration for the transaction consisted of $2.0 million in cash, $400,000 of which was placed in escrow for no less than 18 months after the closing

date (subject to extension in certain circumstances), and 98,668 shares of the Company’s common stock. The Company funded the cash consideration with cash on hand.

On September 8, 2017, the Company and a newly formed wholly owned subsidiary of the Company entered into an Asset Purchase Agreement pursuant to which the Company would acquire substantially all of the assets and assume certain of the liabilities of Tri-State Technical Services, Inc. (“Tri-State”), a Georgia-based distributor of commercial, industrial, and vended laundry products and a provider of installation and maintenance services to the new and replacement segments of the commercial, industrial, and vended laundry industry. The consideration to be paid by the Company in connection with the acquisition consists of $8.25 million in cash (subject to certain working capital and other adjustments), of which $2.1 million will be deposited in an escrow account for no less than 24 months after the closing date (subject to extension in certain circumstances), and 338,115 shares of the Company’s common stock. The Company intends to fund the cash consideration with cash on hand and borrowings under the Company’s existing credit facility. Consummation of the transaction is subject to certain closing conditions. There is no assurance that the transaction will be consummated on the contemplated terms, when anticipated, or at all.

Customers and Markets

The Company’s customer base consists of approximately 9,100 customers in the United States, Canada, the Caribbean and Latin America. The Company’s commercial and industrial laundry equipment and boilers are sold primarily to laundry plants, hotels, motels, cruise lines, hospitals, hospital combines, nursing homes, government institutions, distributors, coin laundries and specialized users. Dry cleaning equipment is sold primarily to dry cleaning stores, chains and higher-end hotels.

Sales, Marketing and Customer Support

The Company employs sales personnel to market its products in the United States, Canada, the Caribbean and Latin America. The Company has exclusive and nonexclusive distribution rights to market the products it sells. Sales orders for equipment and replacement parts and accessories are generally obtained by telephone, e-mail and fax inquiries originated by the customer or by the Company, from existing customer relationships and from newly formed customer relationships. The Company supports product sales through its websites and by advertising in trade publications, participating in trade shows and engaging in regional promotions and sales incentive programs.

The Company seeks to establish customer satisfaction by offering:

The Company trains its employees to provide service and customer support. The Company uses in-person classroom training, instructional videos and vendor sponsored seminars to educate employees about product information. In addition, the Company’s technical staff has prepared training manuals, written in English and Spanish, relating to specific training procedures. The Company’s technical personnel are retrained as the Company believes to be necessary, including in connection with the development of new technology.

Foreign Sales

For the fiscal year ended June 30, 2017 (“fiscal 2017”) and the fiscal year ended June 30, 2016 (“fiscal 2016”), revenues related to foreign sales totaled approximately $5.8 million and $4.6 million, respectively, substantially all of which related to the sale of commercial and industrial laundry and dry cleaning equipment and boilers to customers in Canada, the Caribbean and Latin America.

All of the Company’s foreign sales require the customer to make payment in United States dollars. Foreign sales may be affected by the strength of the United States dollar relative to the currencies of the countries in which the Company’s customers are located, as well as the strength of the economies of the countries in which the Company’s customers are located.

Sources of Supply

The Company purchases commercial and industrial laundry products, dry cleaning machines, boilers and other products from a number of manufacturers and suppliers. Purchases from four manufacturers accounted for approximately 59% of the Company’s purchases for fiscal 2017, while purchases from three manufacturers accounted for approximately 68% of the Company’s purchases for fiscal 2016. The major manufacturers of the products sold by the Company are Pellerin Milnor Corporation, Chicago Dryer Company, Dexter Laundry, Inc., Alliance Laundry Systems, LLC, Cleaver Brooks Inc., E-Tech Inc., Fulton Thermal Corp., and Unipress Corporation. The Company has contracts with several of the manufacturers and suppliers of the products which the Company sells and has established, long-standing relationships with most of its manufacturers and suppliers. The Company has not historically experienced difficulty in purchasing products it distributes and believes that it has good working relationships with its manufacturers and suppliers. The Company further believes that such relationships provide the Company with certain competitive advantages, including exclusivity for certain products in certain areas and, in certain cases, favorable prices and terms. However, there is no assurance that the Company will maintain its relationships with any of its suppliers, and the loss of certain of these relationships, including the loss of a relationship with one of the Company’s principal suppliers, could adversely affect the Company’s business and results.

Due to special options and features on most of the larger and more expensive equipment ordered by customers, in most instances, the Company purchases the equipment sold by it after its receipt of orders from its customers. However, the Company also maintains an inventory of more standardized and smaller-sized equipment that often requires more rapid delivery to meet customer needs.

Competition

The commercial and industrial laundry, dry cleaning equipment and boiler distribution business is highly competitive and fragmented, with over 100 full-line or partial-line equipment distributors in the United States. The Company’s management believes that no one distributor has a major share of the market; substantially all distributors are independently owned; and, with the exception of several regional distributors, distributors operate primarily in local markets. In the United States market, the Company’s primary competition is from a number of full-line distributors and several manufacturers, which sell direct to the customer. In foreign markets, the Company also competes with several distributors and manufacturers. Competition is based primarily on price, product quality, and delivery and support services provided to the customer. In all geographic areas, the Company seeks to compete by offering an extensive product selection, value-added services, such as product inspection and quality assurance, a toll-free customer support line and technical websites, reliability, warehouse location, price, competitive special features and, with respect to certain products, exclusivity from the manufacturer.

Research and Development

The Company’s research and development efforts and expenses are generally immaterial as most of the Company’s products are distributed for manufacturers that perform their own research and development.

Patents and Trademarks

The Company is the owner of United States service mark registrations for the names EnviroStar® and for the name DRYCLEAN USA®, which is licensed by it to retail dry cleaning establishments. The Company intends to use and protect these or related service marks and tradenames, as necessary.

Compliance with Environmental and Other Government Laws and Regulations

Over the past several decades, federal, state and local governments in the United States and various other countries have enacted environmental protection laws in response to public concerns about the environment, including with respect to Perc, the primary cleaning agent historically used in the commercial and industrial dry cleaning process. A number of industries, including the commercial and industrial dry cleaning and laundry equipment industries, are subject to these evolving laws and implementing regulations. As a supplier to the industry, the Company serves customers who are primarily responsible for compliance with environmental regulations. Among the United States federal laws that the Company believes are applicable to the industry are the Comprehensive Environmental Response, Compensation and Liability Act of 1980 (“CERCLA”), which provides for the investigation and remediation of hazardous waste sites; the Resource Conservation and Recovery Act of 1976, as amended (“RCRA”), which regulates the generation and transportation of hazardous waste as well as its treatment, storage and disposal; and the Occupational Safety and Health Administration Act (“OSHA”), which regulates exposure to toxic substances and other health and safety hazards in the workplace. Most states and a number of local jurisdictions have laws that regulate the environment, which are at least as stringent as the federal laws.

The Company does not believe that compliance with federal, state and local environmental and other laws and regulations which have been adopted have had, or will have, a material effect on its capital expenditures, earnings or competitive position.

Employees

As of September 1, 2017, the Company had 138 employees. None of the Company’s employees are subject to a collective bargaining agreement. The Company believes that its relations with its employees are satisfactory.

Item 1A. Risk Factors.

The Company is subject to various risks and uncertainties, including those described below, which could adversely affect the Company’s business, financial condition, results of operations and cash flows, and the value of the Company’s common stock. The risks described below are not the only risks faced by the Company. Additional risks not presently known to the Company or other factors that the Company does not presently perceive to present significant risks to the Company at this time may also impair the Company’s business, financial condition, results of operations or cash flows, or the value of the Company’s common stock.

Acquisitions could result in operating difficulties, dilution, and other consequences that may adversely impact the Company’s business and results of operations.

Acquisitions are an important element of the Company’s growth strategy and are material to the Company’s financial condition and results of operations. Acquisitions and the Company’s efforts with respect thereto involve a number of risks, including, but not limited to:

As a result of these or other problems and risks, businesses the Company may acquire may not produce the revenues, earnings, cash flows or business synergies anticipated, and the acquired businesses may not perform as expected. As a result, the Company may incur higher costs and realize lower revenues and earnings than anticipated. The Company may not be able to successfully address these problems, integrate any acquired businesses or generate sufficient revenue to offset the associated costs or other negative effects on its business.

In addition, acquisitions have in the past resulted in, and are expected in the future to result in, dilutive issuances of the Company’s equity securities and the incurrence of debt. See “The Company’s indebtedness may impact its financial condition and results of operations, and the terms of the Company’s indebtedness may place restrictions on the Company” below. Acquisitions may also result in contingent liabilities, or amortization expenses, or impairment of goodwill and/or purchased long-lived assets, and restructuring charges, any of which could harm the Company’s financial condition or results.

The Company’s revenues increased by approximately 161% in fiscal 2017 compared to fiscal 2016, primarily due to the Western State Design Acquisition in October 2016. Businesses that grow rapidly often have difficulty managing their growth.  Such growth may place significant demands on management, as well as on the Company’s accounting, financial, information and other systems and on the Company’s business.  Management may not be able to manage the Company’s growth effectively or successfully, and the Company’s financial, accounting, information and other systems may not be able to successfully accommodate the Company’s growth.

Further, the Company may not be successful in consummating acquisitions or other strategic transactions, including the proposed acquisition of Tri-State, as expected, whether on the contemplated terms, in the time frame anticipated, or at all. Expenses related to the Company’s pursuit of acquisitions and other strategic transactions may be significant and will be incurred by the Company regardless of whether the underlying acquisition or other strategic transaction is ultimately consummated.

If the Company fails to collect its accounts receivable or is required to increase its allowance for doubtful accounts, its operating results could be materially adversely affected.

The Company maintains an allowance for doubtful accounts for estimated losses resulting from the inability of its customers to make required payments. As of June 30, 2017, the Company’s accounts receivable were approximately $13.6 million, and its allowance for doubtful accounts was approximately $150,000. Accounts receivable due from a federal government agency accounted for approximately 28.8% of the Company’s accounts receivable at June 30, 2017. There is no assurance that the Company will collect its outstanding accounts receivable or that its allowance for doubtful accounts will be adequate. The failure to collect outstanding receivables could have a material adverse effect on the Company’s business, prospects, operating results or financial condition. Further, if the Company is required to make additional allowances, including, without limitation, in the event the financial condition of the Company’s customers was to deteriorate and, for that reason or based on other factors, their ability to make required payments was impaired, then the Company’s operating results for the period in which the determination or allowance is or was made would be adversely affected.

The Company’s indebtedness may impact its financial condition and results of operations, and the terms of the Company’s indebtedness may place restrictions on the Company.

The Company’s level of indebtedness may have several important effects on the Company’s operations, including, without limitation, that the Company may be required to use a portion of its cash flow for the payment of principal and interest due on outstanding indebtedness, that outstanding indebtedness and the Company’s leverage position will increase the impact on the Company of negative changes in general economic and industry conditions, as well as competitive pressures, and that the Company’s ability to obtain additional financing for acquisitions, working capital or other corporate purposes may be impacted.

The Company has a $20.0 million credit facility (the “Credit Facility”), consisting of a $15.0 million revolving line of credit, subject to certain adjustments, and a $5.0 million term loan. At June 30, 2017, no amounts were outstanding under the revolving line of credit and approximately $4.5 million was outstanding under the term loan. The Credit Facility contains affirmative covenants which require the Company to meet certain financial criteria, including a fixed charge coverage ratio, an asset coverage ratio, a senior leverage ratio and a total leverage ratio, as well as other covenants which may restrict, among other things, the Company’s ability to pay dividends, complete merger, acquisition or similar transactions, make certain capital expenditures, incur certain operating lease expenditures or repurchase shares of its common stock. See Note 12 to the Consolidated Financial Statements included in this Report for additional information regarding the Credit Facility.

The Company may incur additional debt financing as determined to be appropriate by management, including in connection with the financing of acquisitions, which would increase the Company’s vulnerability to the risk factors described above related to its level of indebtedness and may place restrictions on the Company similar or in addition to those contained in the current Credit Facility. In addition, the Company may not be able to obtain additional debt financing on acceptable terms, or at all, including in the event additional funds are necessary to consummate an acquisition or support the Company’s business operations.

The products the Company sells could fail to perform according to specifications or prove to be unreliable, which could damage the Company’s customer relationships and industry reputation and result in lawsuits and loss of sales.

The Company’s customers require demanding specifications for product performance and reliability. Product defects or other failures to perform to specifications or as expected could result in higher service costs and may damage the Company’s customer relationships and industry reputation and/or otherwise negatively impact the Company’s sales and business. Further, the Company may be

subject to lawsuits if any of the products it distributes fails to operate properly or causes property or other physical damage.

The Company’s business and results may be adversely affected if the Company does not maintain its relationships with its significant suppliers or customers.

The Company purchases the products it distributes from a number of manufacturers and suppliers. Purchases from four of these manufacturers accounted for a total of approximately 59% of the Company’s product purchases for fiscal 2017, and purchases from three manufacturers accounted for a total of approximately 68% of the Company’s product purchases for fiscal 2016. While the Company has not historically experienced difficulty in purchasing products it distributes, and believes it has good working relationships with the manufacturers or suppliers from which the Company purchases its products, if such relationships deteriorate or the Company is unable to maintain such relationships, including with any of its principal manufacturers, the Company’s business and results could be materially and adversely impacted. Further, other than contracts with six manufacturers, including four of the Company’s principal manufacturers, the Company has no contractual basis for maintaining its relationships with its manufacturers and suppliers. In addition, third parties may not comply with the terms of any agreements to which the Company is a party or may choose to terminate such agreements, allow such agreements to expire or seek to revise the agreements on terms which are less favorable to the Company than the prevailing terms, any of which could materially and adversely impact the Company’s business and results.

In addition, while the Company sells its products to various users, including independent and franchise dry cleaning stores and chains, laundry plants, hotels, motels, cruise lines, hospitals, nursing homes, government institutions, coin laundry stores and distributors. Sales to a federal government agency accounted for approximately 22% of the Company’s revenues for fiscal 2017; however, no single contract for a federal government facility accounted for more than 10% of the Company’s revenues for fiscal 2017. The Company’s operating results and financial condition could be materially adversely impacted if the Company loses a significant customer, fails to meet its customers’ expectations or otherwise realizes a decrease in its sales.

The Company faces substantial competition.

The commercial and industrial laundry, dry cleaning equipment and boiler distribution business is highly competitive and fragmented, with over 100 full-line or partial-line equipment distributors in the United States. The Company’s management believes that no single competitor of the Company has a major share of the market; substantially all distributors are independently owned; and, with the exception of several regional distributors, distributors operate primarily in local markets. In the United States, the Company’s primary competition is from a number of full line distributors and several manufacturers, which sell direct to the customer. In foreign markets, the Company also competes with distributors and manufacturers. Certain of the Company’s competitors may have greater financial and other resources than the Company. In addition, some of the Company’s competitors may have less indebtedness than the Company, and therefore more of their cash may be potentially available for business purposes other than debt service. The Company’s results and financial condition would be materially and adversely impacted if the Company is unable to compete effectively. Further, the Company may not be able to operate profitably if the competitive environment changes.

Inability to protect the Company’s service marks and other proprietary rights could adversely impact the Company’s competitive position.

The Company is the owner of United States service mark registrations for the names EnviroStar® and for the name DRYCLEAN USA®, which is licensed by the Company to retail dry cleaning establishments. While the Company intends to and has taken steps to protect its service marks and other proprietary rights, the Company may not be successful in doing so and third parties may infringe or

misappropriate the Company’s intellectual property and proprietary rights. Any infringement or misappropriation of the Company’s intellectual property and proprietary rights could damage their value and could have a material adverse effect on the Company’s business, results and financial condition. Further, the Company may have to engage in litigation to protect the rights to its intellectual property and proprietary rights, which could result in significant litigation expenses and require a significant amount of management's time.

Damages to or disruptions at the Company’s facilities could adversely impact the Company’s business, operating results and financial condition.

Although the Company has certain limited protection afforded by insurance, the Company’s business, earnings and financial condition could be materially adversely affected if it suffers damages to, or disruptions at, its facilities. The Company’s executive offices and one of its distribution centers for the products it distributes are housed in two leased adjacent facilities totaling approximately 38,000 square feet in Miami, Florida, which is an area subject to hurricane casualty and flood risk. Additionally, the distribution centers for Western State Design are located in California, which is an area subject to earthquake casualty risk.

The Company faces risks associated with environmental and other regulation.

The Company’s business and operations are subject to federal, state, local and foreign environmental and other laws and regulations, including environmental laws governing the discharge of pollutants, the handling, generation, storage and disposal of hazardous materials, substances, and wastes and the cleanup of contaminated sites. The Company may not remain in compliance with all applicable laws and regulations and could be required to incur significant costs as a result of violations of, liabilities under, or efforts to comply with, applicable laws and regulations. In addition, violations may have other adverse implications for the Company, including negative public relations and potential litigation. Further, the Company may incur significant compliance costs in the event of changes to the laws and regulations applicable to the Company.

The Company faces risks related to its foreign operations.

For fiscal 2017, the Company’s revenues from foreign operations totaled approximately $5.8 million, which represented approximately 6% of the Company’s total revenues for such fiscal year. For fiscal 2016, the Company’s revenues from foreign operations totaled approximately $4.6 million, which represented approximately 13% of the Company’s total revenues for such fiscal year. Revenues from foreign operations related principally to the Company’s sales of commercial and industrial laundry and dry cleaning equipment and boilers to Canada, the Caribbean and Latin America. All of the Company’s foreign sales require the customer to make payment in United States dollars. Foreign sales may be affected by the strength of the United States dollar relative to the currencies of the countries in which customers and competitors are located, as well as the strength of the economies of the countries in which the Company’s customers are located.

Further, conducting an international business inherently involves a number of difficulties, risks and uncertainties, such as:

Any of the above factors may materially and adversely affect the Company’s business, prospects, operating results or financial condition.

Henry M. Nahmad may be deemed to control the Company.

Henry M. Nahmad, the Company’s Chairman, Chief Executive Officer and President, may be deemed to control the Company as a result of his voting power over shares representing approximately 67.6% of the issued and outstanding shares of the Company’s common stock. The shares over which Mr. Nahmad has voting power include shares subject to restricted stock awards granted to Mr. Nahmad, shares held by Symmetric Capital LLC (“Symmetric Capital”) and Symmetric Capital II, each of which may be deemed to be controlled by Mr. Nahmad as a result of his serving as Manager of such entity, and shares which Symmetric Capital has the right to vote pursuant to Stockholders Agreements entered into with Michael S. Steiner, a director and Executive Vice President and Chief Operating Officer of the Company, and his brother, Robert M. Steiner, and with WSD, Dennis Mack, a director and Executive Vice President of the Company, and Tom Marks, an Executive Vice President of the Company. Copies of such Stockholder Agreements are filed as exhibits to this Report. Under the Company’s Bylaws, the election of directors requires a plurality vote and all other matters put to a vote of the Company’s stockholders require the affirmative vote of a majority of the shares of the Company’s common stock represented at a meeting, in person or by proxy, and entitled to vote on the matter unless a greater percentage is required by applicable law. Consequently, other than in very limited circumstances where a greater vote is required by applicable law, Mr. Nahmad, as the Manager of Symmetric, without the consent or vote of any other stockholders of the Company, has the voting power to approve actions that require stockholder approval and elect directors acceptable to him. Mr. Nahmad’s interests may conflict with the interests of the Company’s other stockholders. In addition, Mr. Nahmad’ control could have the effect of delaying or preventing a change in control or changes in management, deprive the Company’s other stockholders of an opportunity to receive a premium for their shares in connection with any sale of the Company, or otherwise adversely impact the market price of the Company’s common stock.

Further, as a result of Mr. Nahmad’s controlling voting position with respect to the Company’s common stock, the Company is a “controlled company” within the meaning of the listing standards of the NYSE American, on which the Company’s common stock is listed. As a “controlled company,” the Company is not required to comply with certain corporate governance requirements set forth in the listing standards of the NYSE American, including:

While executive compensation matters are determined by the Company’s independent directors and the Company’s Board of Directors is currently comprised of a majority of independent directors, the Company does not have a standing nominating/corporate governance committee and the Company has in the past from time to time, including for portions of fiscal 2017 and 2016, maintained a Board of Directors not comprised of a majority of independent directors. In addition, in the discretion of the Company’s Board of Directors, the Company may choose to utilize or continue to utilize any or all of the exceptions in the future. As a result, the Company’s stockholders may not have the same protections as a stockholder of other publicly-traded companies and the market price of the Company’s common stock may be adversely affected.

The concentration of ownership with respect to the Company’s common stock also results in there being a limited trading volume, which may make it more difficult for stockholders to sell their shares and increase the price volatility of the Company’s common stock.

As a “smaller reporting company,” the Company may avail itself of reduced disclosure requirements, which may make the Company’s common stock less attractive to investors.

Because the market value of the Company’s common stock as of the end of its most recently completed second fiscal quarter was less than $75 million, the Company is a “smaller reporting company” under applicable SEC rules and regulations. As a “smaller reporting company,” the Company has relied on exemptions from certain disclosure requirements that are applicable to other public companies. The Company may continue to rely on such exemptions for so long as the Company remains a “smaller reporting company.” These exemptions include reduced financial disclosure, reduced disclosure obligations regarding executive compensation, and not being required to comply with the auditor attestation requirements of Section 404 of the Sarbanes-Oxley Act of 2002. The Company’s reliance on these exemptions may result in the public finding the Company’s common stock to be less attractive and adversely impact the market price of the Company’s common stock or the trading market thereof.

The Company’s success depends on key personnel, the loss of whom could harm the Company’s business, operating results and financial condition.

The Company’s business is dependent on the active participation of its executive officers, including Henry M. Nahmad, Michael S. Steiner, Dennis Mack and Tom Marks. The loss of the services of any of these individuals could adversely affect the Company’s business and prospects. In addition, the Company’s success is dependent on its ability to retain and attract additional qualified management and other personnel. Competition for such talent is intense, and the Company may not be successful in attracting and retaining such personnel.

The issuance of preferred stock and common stock, and the Company’s Board of Directors authority to approve issuances of preferred stock and common stock, could adversely affect the Company’s stockholders and have an anti-takeover effect.

The Company’s Board of Directors is authorized under the Company’s Certificate of Incorporation, as amended (the “Certificate of Incorporation”), to approve the issuance by the Company of up to 200,000 shares of preferred stock, and to designate the relative rights, preferences and limitations of any preferred stock so issued, in each case, without any further action on the part of the Company’s stockholders. Currently, no shares of preferred stock are outstanding. In the event that the Company issues preferred stock in the future that has preference over the Company’s common stock with respect to payment of dividends or upon liquidation, dissolution or winding up of the Company, the rights of holders of shares of the Company’s common stock may be adversely affected. In addition, the Company is authorized under its Certificate of Incorporation to issue up to 20,000,000 shares of common stock. There are currently approximately 10.5 million shares of common stock outstanding. Subject to applicable law and the rules and regulations of the NYSE American, the Company’s Board of Directors (or a committee thereof, in the case of shares issued under the Company’s 2015 Equity Incentive Plan (the “Plan”)) has the power to approve the issuance of any authorized but unissued shares of the Company’s common stock, and any such issuances, including, without limitation, those under the Plan or pursuant to any acquisitions consummated by the Company or in connection with the financing thereof, would result in dilution to the Company’s stockholders. These provisions of the Certificate of Incorporation could also delay, defer or prevent a change of control of the Company or its management, and could limit the price that investors are willing to pay in the future for shares of the Company’s common stock.

Litigation and legal proceedings and the impact of any finding of liability or damages could adversely impact the Company and its financial condition and operating results.

The Company may from time to time become subject to litigation and other legal proceedings. Litigation and other legal proceedings may require the Company to incur significant expenses, including those relating to legal and other professional fees. In addition, litigation and other legal proceedings are

inherently uncertain, and adverse outcomes in litigation or other legal proceedings could adversely affect the Company’s financial condition, cash flows, and operating results.

There are inherent uncertainties involved in estimates, judgments and assumptions used in the preparation of financial statements in accordance with GAAP. Any changes in estimates, judgments and assumptions used could have a material adverse effect on the Company’s business, financial condition and operating results.

The consolidated financial statements included in the periodic reports the Company files with the SEC, including those included as part of this Report, are prepared in accordance with accounting principles generally accepted in the United States of America, or GAAP. The preparation of financial statements in accordance with GAAP involves making estimates, judgments and assumptions that affect reported amounts of assets (including goodwill and other intangible assets), liabilities and related reserves, revenues, expenses and income. This includes estimates, judgments and assumptions for assessing the recoverability of intangible assets pursuant to applicable accounting guidance. If any estimates, judgments or assumptions change in the future, the Company may be required to record additional expenses or impairment charges, which would be recorded as a charge against earnings, and any such changes could result in corresponding changes to the amounts of assets (including goodwill and other intangible assets), liabilities, revenues, expenses and income, any of which could have a material adverse effect on the Company’s financial condition and operating results.

Item 1B. Unresolved Staff Comments.

None.

Item 2. Properties.

The Company’s executive offices and one of the main distribution centers for its products are housed in two adjacent leased facilities totaling approximately 38,000 square feet in Miami, Florida. The Company also has other facilities and distribution centers, all of which are leased, as set forth in the table below. The Company believes its facilities are in satisfactory condition and are adequate for its present and anticipated future needs.

The following table sets forth certain information concerning the leases at these facilities:

Item 3. Legal Proceedings.

From time to time, the Company is involved in legal and regulatory claims and proceedings arising in the ordinary course of business. While it is not possible to predict or determine the outcome of legal or regulatory proceedings, any losses resulting from any currently pending proceedings would not be expected to have a material adverse impact on the Company’s financial condition, results of operations or cash flows.

Item 4. Mine Safety Disclosures.

Not applicable.

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.

The Company’s common stock is traded on the NYSE American (formerly the NYSE MKT) under the symbol “EVI.” The following table sets forth the high and low per share sales prices of the Company’s common stock on the NYSE American for the periods reflected below.

As of September 22, 2017, there were approximately 242 holders of record of the Company’s common stock.

The following table sets forth information concerning cash dividends declared by the Company’s Board of Directors during the last two fiscal years.

The future declaration and payment of cash dividends with respect to the Company’s common stock, if any, will be determined by the Company’s Board of Directors in light of the Company’s then-current financial condition and liquidity needs and other factors deemed relevant by the Company’s Board of Directors and may be subject to restrictions contained in the Company’s debt instruments. As described in further detail under “Liquidity and Capital Resources” in Item 7 of this Report, the Company has a Credit Facility with Wells Fargo, which requires the Company to comply with certain covenants and may restrict the Company’s ability to pay dividends. However, the Company’s management does not believe that such covenants currently materially limit the Company’s ability to pay dividends or are reasonably likely to materially limit the Company’s ability to pay dividends in the future. There is no assurance that the Company will pay dividends on its common stock in the future.

See Part III, Item 12 of this Report for information regarding securities authorized for issuance under the Company’s equity compensation plan.

Item 6. Selected Financial Data.

Not required.

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

General

The following discussion should be read in conjunction with the Company’s Consolidated Financial Statements and notes thereto contained in Item 8 of this Report. See also “Forward Looking Statements” preceding Part I, Item 1 of this Report.

Overview

The Company, through its wholly-owned subsidiaries, distributes commercial and industrial laundry and dry cleaning equipment and steam and hot water boilers, supplies replacement parts and accessories, provides maintenance and installation services, and designs and plans turn-key laundry, dry cleaning and boiler systems for its customers, which include institutional, retail, industrial and commercial customers. These activities are conducted in the United States, Canada, the Caribbean and Latin America. Historically, the Company’s operations related to these activities consisted solely of the business and operations of Steiner-Atlantic Corp., a wholly-owned subsidiary of the Company (“Steiner-Atlantic”).

On October 10, 2016, the Company, through its wholly-owned subsidiary, Western State Design, Inc. (“Western State Design”), completed the acquisition (the “Western State Design Acquisition”) of substantially all the assets of Western State Design, LLC (“WSD”), a California-based distributor of commercial and industrial laundry equipment and related parts for new laundry facilities and to the replacement laundry market, for a purchase price consisting of $18.5 million in cash and 2,044,990 shares of the Company’s common stock. The cash consideration, which included $2.8 million which was placed in escrow for no less than 18 months after the closing date (subject to extension in certain circumstances), was financed through $12.5 million of borrowings under the credit facility entered into at the time (the “Credit Facility) and $6.0 million of proceeds from the sale of 1,290,323 shares of the Company’s common stock to Symmetric Capital II LLC (“Symmetric Capital II”) in a private placement transaction (the “Private Placement Transaction”). Henry M. Nahmad, the Company’s Chairman, Chief Executive Officer, President and controlling stockholder, is the Manager of, and may be deemed to control, Symmetric Capital II. Pursuant to the Asset Purchase Agreement, the Company, indirectly through Western State Design, also assumed certain of the liabilities of WSD. The financial condition, including assets and liabilities, and results of operations of the acquired business following the October 10, 2016

closing date are included in the Company’s consolidated financial statements as of, and for the fiscal year ended, June 30, 2017.

In addition, on June 19, 2017, the Company, through its wholly owned subsidiary, Martin-Ray Laundry Systems Inc. (“Martin-Ray”), completed the acquisition of substantially all of the assets of Martin-Ray Laundry Systems, Inc. (“MRLS”), a Colorado-based distributor of commercial laundry equipment. The consideration for the transaction consisted of $2.0 million in cash, $400,000 of which was placed in escrow for no less than 18 months after the closing date (subject to extension in certain circumstances), and 98,668 shares of the Company’s common stock. The Company funded the cash consideration with cash on hand. Pursuant to the Asset Purchase Agreement, the Company, indirectly through Martin-Ray, also assumed certain of the liabilities of MRLS. The financial condition, including assets and liabilities, and results of operations of the acquired business following the June 19, 2017 closing date are included in the Company’s consolidated financial statements as of, and for the fiscal year ended, June 30, 2017.

See Note 3 to the Consolidated Financial Statements included in Item 8 of this Report for additional information about the Western State Design Acquisition and Martin-Ray Acquisition.

On September 8, 2017, the Company and a newly formed wholly owned subsidiary of the Company entered into an Asset Purchase Agreement pursuant to which the Company would acquire substantially all of the assets and assume certain of the liabilities of Tri-State Technical Services, Inc. (“Tri-State”), a Georgia-based distributor of commercial, industrial, and vended laundry products and a provider of installation and maintenance services to the new and replacement segments of the commercial, industrial, and vended laundry industry. The consideration to be paid by the Company in connection with the acquisition consists of $8.25 million in cash (subject to certain working capital and other adjustments), of which $2.1 million will be deposited in an escrow account for no less than 24 months after the closing date (subject to extension in certain circumstances), and 338,115 shares of the Company’s common stock. The Company intends to fund the cash consideration with cash on hand and borrowings under the Company’s existing credit facility. Consummation of the transaction is subject to certain closing conditions. There is no assurance that the transaction will be consummated on the contemplated terms, when anticipated, or at all.

In addition, the Company, through an indirect wholly-owned subsidiary, owns the worldwide rights to the name DRYCLEAN USA® and licenses the right to use such name for a fee to retail dry cleaners in the United States, the Caribbean and Latin America.

Total revenues for the fiscal year ended June 30, 2017 (“fiscal 2017”) increased by 161% compared to the fiscal year ended June 30, 2016 (“fiscal 2016”). Net income for fiscal 2017 increased by 82% from fiscal 2016. The increases in revenues and net income during fiscal 2017 are primarily attributable to the results of operations of Western State Design following the Western State Design Acquisition.

Consolidated Financial Condition

The Company’s total assets increased from $10.2 million at June 30, 2016 to $57.4 million at June 30, 2017. The Company’s total liabilities increased from $5.1 million at June 30, 2016 to $25.2 million at June 30, 2017. The increase in total assets and liabilities was primarily attributable to the assets acquired and liabilities assumed by the Company in connection with the Western State Design Acquisition and, to a lesser degree, the Martin-Ray Acquisition.

Liquidity and Capital Resources

The Company had cash and cash equivalents of approximately $727,000 at June 30, 2017 compared to $3.9 million at June 30, 2016. The decrease in cash was primarily due to cash used to fund

the cash consideration paid in connection with the Martin-Ray Acquisition, expenses incurred in connection with such transaction and the Western State Design Acquisition and a $1.0 million dividend paid during January 2017. The following table summarizes the Company’s Consolidated Statements of Cash Flows (in thousands):

For the fiscal year ended June 30, 2017, operating activities provided cash of approximately $2.6 million compared to approximately $1.4 million in fiscal 2016. This $1.2 million increase in cash provided by operating activities was attributable to a $1.4 million increase in net earnings, partially offset by changes in working capital.

Investing activities used cash of approximately $14.7 million (net of cash acquired) during fiscal 2017 in connection with the funding of the cash portion of the consideration paid in connection with the Western State Design Acquisition and Martin-Ray Acquisition.

Financing activities provided cash of approximately $9.1 million in fiscal 2017, which was primarily attributable to borrowings under the Credit Facility of approximately $25.9 million and $6.0 million of proceeds from the issuance and sale of 1,290,323 shares of the Company’s common stock in the Private Placement Transaction. $12.5 million of borrowings under the Credit Facility and the $6.0 million of proceeds from the Private Placement Transaction were used to finance the Cash Consideration for the Western State Design Acquisition. The balance of the Credit Facility borrowings were used for general corporate purposes. These sources of cash were partially offset by $21.7 million of repayments of amounts borrowed under the Revolving Line of Credit (as defined below) portion of the Credit Facility, the payment of approximately $88,000 in financing fees in connection with the Credit Facility and $1.0 million of dividend payments. Financing activities used cash of approximately $1.4 million in fiscal 2016 related to the Company’s payment of a cash dividend to its stockholders.

In connection with the Western State Design Acquisition, on October 7, 2016, the Company entered into a $20.0 million Credit Facility, consisting of a $15.0 million revolving line of credit, subject to adjustment as described below (the “Revolving Line of Credit”), and a $5.0 million term loan (the “Term Loan”). The Company used a total of approximately $12.6 million of borrowings under the Revolving Line of Credit and Term Loan, including approximately $88,000 of fees, costs and expenses arising in connection with entering into the Credit Facility, to finance a portion of the cash consideration paid in connection with the Western State Design Acquisition. At June 30, 2017, no amounts were outstanding under the Revolving Line of Credit and $4.5 million was outstanding under the Term Loan. The Credit Facility replaced the Company’s previous credit facility which allowed for borrowings of up to $2.25 million. No amounts were outstanding under such prior credit facility at June 30, 2016 or at any time during the period from July 1, 2016 through October 7, 2016, when it was replaced by the Credit Facility.

The Credit Facility has a term of five years and matures on October 10, 2021. Interest on the outstanding principal amount of borrowings under the Credit Facility accrues at an annual rate equal to the daily one-month LIBOR, plus (i) 2.25% in the case of borrowings under the Revolving Line of Credit and (ii) 2.85% in the case of borrowings under the Term Loan. In addition to interest payments, borrowings under the Term Loan require monthly principal payments of approximately $60,000 over the five-year term, with the balance due upon maturity.

The obligations of the Company under the Credit Facility are secured by substantially all of the assets of the Company and its subsidiaries. In addition, the Company’s subsidiaries have jointly and

severally guaranteed the performance of the Company’s payment and other obligations under the Credit Facility. The Credit Facility also contains affirmative covenants which require the Company to meet certain financial criteria, including a fixed charge coverage ratio, an asset coverage ratio, a senior leverage ratio and a total leverage ratio, as well as other covenants which may restrict, among other things, the Company’s ability to pay dividends, complete merger, acquisition or similar transactions, make certain capital expenditures, incur certain operating lease expenditures or repurchase shares of its common stock. Additionally, the amount available to borrow under the Revolving Line of Credit is determined in accordance with an asset-based formula, which may restrict the amount available for borrowing under the Revolving Line of Credit to an amount less than $15.0 million. At June 30, 2017, the Company was in compliance with all Credit Facility covenants and based on the asset-based formula, $11.5 million was available to borrow under the Revolving Line of Credit.

The Company believes that its existing cash, cash equivalents, net cash from operations, and funds available under the Company’s Credit Facility will be sufficient to fund its operations and anticipated capital expenditures for at least the next twelve months. The Company may also seek to raise additional funds through other issuances of equity securities, issuances of debt securities and/or the incurrence of additional secured or unsecured indebtedness, including in connection with acquisitions or other transactions consummated by the Company as part of its buy-and-build growth strategy.

Off-Balance Sheet Financing

As of June 30, 2017, the Company had no off-balance sheet financing arrangements within the meaning of Item 303(a)(4) of Regulation S-K.

Results of Operations

Revenues

Revenues for fiscal 2017 increased by approximately $58.0 million (161%) from fiscal 2016, primarily as a result of the Western State Design Acquisition on October 10, 2016.

Operating Expenses

Cost of sales, expressed as a percentage of revenues, increased to 78.4% in fiscal 2017 from 77.2% in fiscal 2016, primarily due to changes in product mix.

Selling, general and administrative expenses increased by approximately $9.6 million (176%) in fiscal 2017 compared to fiscal 2016. As a percentage of revenues, selling, general and administrative expenses increased to 15.9% in fiscal 2017 from 15.1% in fiscal 2016. These increases were primarily due to the consolidation of Western State Design following the Western State Design Acquisition, including administrative expenses of Western State Design, and $559,000 of transaction costs related to the Western State Design Acquisition and Martin-Ray Acquisition.

Interest expense, net was approximately $160,000 in fiscal 2017 compared to approximately $2,000 of interest income, net in fiscal 2016, and represents interest on borrowings under the Credit Facility entered into in connection with the financing of the Western State Design Acquisition.

The Company’s effective income tax rate was 38.9% for fiscal 2017 compared to 37.7% in fiscal 2016. The increase in the effective income tax rate in fiscal 2017 reflects higher state taxes in additional operating jurisdictions following the Western State Design Acquisition.

Inflation

Inflation did not have a significant effect on the Company’s operations during either of fiscal 2017 or 2016.

Transactions with Related Parties

The Company’s wholly-owned subsidiary, Steiner-Atlantic, leases 27,000 square feet of warehouse and office space from an affiliate of Michael S. Steiner, a director and Executive Vice President and Chief Operating Officer of the Company, pursuant to a lease agreement dated November 1, 2014. Under the lease, which has a term of three years, monthly base rental payments were $10,275 during the first year of the lease and $10,580 during the second year of the lease, and are $10,900 during the third year of the lease. In addition to base rent, Steiner-Atlantic is responsible under the lease for costs related to real estate taxes, utilities, maintenance, repairs and insurance. Payments under this lease totaled approximately $139,000 and $133,000 in during the fiscal year ended 2017 and 2016, respectively.

Since October 10, 2016, the Company’s wholly-owned subsidiary, Western State Design, has leased 17,600 square feet of warehouse and office space from an affiliate of Dennis Mack, a director and Executive Vice President of the Company, and Tom Marks, an Executive Vice President of the Company. Under the lease, monthly base rental payments are $12,000 during the initial term of the lease. In addition to base rent, Western State Design is responsible under the lease for costs related to real estate taxes, utilities, maintenance, repairs and insurance. The lease has an initial term of five years and provides for two successive three-year renewal terms at the option of Western State Design. Payments under this lease totaled approximately $88,000 in the period from October 10, 2016 through June 30, 2017.

On June 19, 2017, the Company’s wholly-owned subsidiary, Martin-Ray, entered into a lease agreement, pursuant to which it leases 10,000 square feet of warehouse and office space from an affiliate of Jim Hohnstein, President of Martin-Ray, and Bill Mann, a Vice President of Martin-Ray. Under the lease, monthly base rental payments are $6,000 during the initial term of the lease. In addition to base rent, Martin-Ray is responsible under the lease for costs related to real estate taxes, utilities, maintenance, repairs and insurance. The lease has an initial term of three years and provides for two successive three-year renewal terms at the option of Martin-Ray.

See also “Overview” above and Note 17 to the Consolidated Financial Statements included in Item 8 of this Report for a description of the Private Placement Transaction between the Company and an affiliate of Henry M. Nahmad, the Company’s Chairman, Chief Executive Officer and President, which was completed on October 10, 2016.

Critical Accounting Policies

Use of Estimates

In connection with the preparation of its financial statements, the Company makes estimates and assumptions, including those that affect the reported amounts of assets and liabilities, contingent assets and liabilities, and the reported amounts of revenues and expenses during the reported periods. Estimates and assumptions made may not prove to be correct, and actual results may differ from the estimates. The accounting policies that the Company has identified as critical to its business operations and to an understanding of the Company’s financial statements are set forth below. The critical accounting policies discussed below are not intended to be a comprehensive list of all of the Company’s accounting policies. In many cases, the accounting treatment of a particular transaction is specifically dictated by GAAP, with no need for management’s judgment in their application. There are also areas in which management’s judgment in selecting any available alternative would not produce a materially different result.

Revenue Recognition

Products are generally shipped Free on Board (“FOB”) from the Company’s warehouses or drop shipped from the Company’s vendor as FOB, at which time risk of loss and title passes to the purchaser. Revenue is recognized when there is persuasive evidence that the arrangement, shipment or delivery has occurred, the price is fixed and determinable, and collectability is reasonably assured. Installation revenues are recognized when the installation of the equipment has occurred.

There are also instances where the Company enters into longer termed contracts where the price to the customer includes the sale of the equipment and the related installation. The installation on these types of contracts is usually completed within six to twelve months. Revenues from these contracts are recognized under the percentage-of-completion method of accounting, measured by the percentage of costs incurred to date against the estimated total costs for each contract. This method is used for revenue from these contracts because management considers the total cost to be the best available measure of progress on such contracts. Due to the inherent uncertainties in estimating costs, it is possible that the estimates used may change in the near term.

Contract costs include all direct material and labor costs and those indirect costs related to contract performance, such as indirect labor, supplies, tolls and insurance. Selling, general and administrative costs are charged to expense as incurred. Provisions for estimated losses on uncompleted contracts are made in the period in which such losses are determined. Changes in job performance, job conditions and estimated profitability may result in revisions to costs and income which would be recognized in the period during which the revisions are determined.

Costs and estimated earnings in excess of billings are classified as other current assets. Billings in excess of costs on uncompleted contracts are classified as current liabilities. Contract retentions billed are included in accounts receivable.

Revenues from part sales are recognized when the part is shipped and service revenues are recognized when the service is completed.

Goodwill

The Company evaluates goodwill for impairment annually or more frequently when an event occurs or circumstances change that indicate that the carrying value may not be recoverable. The Company tests goodwill for impairment by first comparing the fair value of the reporting unit to its carrying value. If the fair value is determined to be less than the carrying value, a second step is performed to measure the amount of impairment loss. This step compares the current implied goodwill in the reporting unit to its carrying amount. If the carrying amount of the goodwill exceeds the implied

goodwill, an impairment is recorded for the excess. The Company performed its annual impairment test on April 1 and determined there was no impairment.

Customer Relationships, Tradenames and Other Intangible Assets

Customer relationships, tradenames, and other intangible assets are stated at cost less accumulated amortization. These assets are amortized on a straight-line basis over the estimated future periods to be benefited (5-10 years). The Company reviews the recoverability of intangible assets that are amortized based primarily upon an analysis of undiscounted cash flows from the intangible assets. In the event the expected future net cash flows should become less than the carrying amount of the assets, an impairment loss would be recorded in the period the determination is made based on the fair value of the related assets.

Income Taxes

The Company follows Financial Accounting Standards Board (“FASB”) Accounting Standards Codification (“ASC”) Topic 740, “Income Taxes” (“ASC 740”). Under the asset and liability method of ASC 740, deferred tax assets and liabilities are recognized for the future tax consequences attributed to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled. Under ASC 740, the effect on deferred tax assets and liabilities of a change in tax rates is recognized in income in the period that includes the enactment date. If it is determined that it is more likely than not that some portion of a deferred tax asset will not be realized, a valuation allowance is recognized.

Significant judgment is required in developing the Company’s provision for income taxes, deferred tax assets and liabilities, and any valuation allowances that might be required against the deferred tax assets. Management evaluates the Company’s ability to realize its deferred tax assets on a quarterly basis and adjusts its valuation allowance when it believes that it is more likely than not that the asset will not be realized.

The Company follows ASC Topic 740-10-25, “Accounting for Uncertainty in Income Taxes,” which contains a two-step approach to recognizing and measuring uncertain tax positions. The first step is to evaluate the tax position for recognition by determining if the weight of available evidence indicates it is more likely than not that the position will be sustained on audit, including resolution of related appeals or litigation processes, if any. The second step is to measure the tax benefit as the largest amount which is more than 50% likely of being realized upon ultimate settlement. The Company considers many factors when evaluating and estimating its tax positions and tax benefits, which may require periodic adjustments and which may not accurately anticipate actual outcomes. At June 30, 2017 and 2016, the Company does not believe that there are any unrecognized tax benefits related to tax positions taken on its income tax returns. The Company’s policy is to classify interest and penalties related to unrecognized tax benefits, if and when required, as part of interest expense and general and administrative expense, respectively, in the Company’s consolidated statements of operations. The Company is subject to examination by U.S. federal and state authorities for the tax years including and subsequent to 2013.

Recently Issued Accounting Guidance

See Note 2 to the Consolidated Financial Statements included in Item 8 of this Report for a description of Recently Issued Accounting Guidance.

Item 7A. Quantitative and Qualitative Disclosures About Market Risk.

Market risk is defined as the risk of loss arising from adverse changes in market valuations resulting from interest rate risk, foreign currency exchange rate risk, commodity price risk and equity

price risk. The Company’s primary market risks are interest rate risk and foreign currency exchange rate risk.

The Company’s indebtedness may subject the Company to interest rate risk. Interest rates are subject to the influence of economic conditions generally, both domestic and foreign, and also to the monetary and fiscal policies of the United States and its agencies, particularly the Federal Reserve. The nature and timing of any changes in such policies or general economic conditions and the effect they may have on the Company are unpredictable. The Company’s indebtedness may also have other important impacts on the Company, including that the Company will be required to utilize cash flow to service the debt, indebtedness may make the Company more vulnerable to economic downturns, and the Company’s indebtedness subjects the Company to covenants and restrictions on its operations and activities, including its ability to pay dividends and take certain other actions. As of June 30, 2017, the Company had approximately $4.5 million of outstanding borrowings, all of which was borrowed under the Term Loan portion of the Credit Facility and accrues interest at an annual rate equal to the daily one-month LIBOR plus 2.85%. See “Liquidity and Capital Resources” under Item 7 above for additional information regarding the Term Loan. Based on the amounts outstanding under Term Loan at June 30, 2017, a hypothetical 1% increase in daily one-month LIBOR would increase the Company’s annual interest expense by approximately $45,000.

All of the Company’s export sales require the customer to make payment in United States dollars. Accordingly, foreign sales may be affected by the strength of the United States dollar relative to the currencies of the countries in which the Company’s customers are located, as well as the strength of the economies of the countries in which the Company’s customers are located. The Company has, at times in the past, paid certain suppliers in Euros. The Company had no foreign exchange contracts outstanding at June 30, 2017 or 2016.

The Company’s cash and cash equivalents are maintained in bank accounts, including a bank money market account, which bear interest at prevailing interest rates. At June 30, 2017, bank deposits exceeded Federal Deposit Insurance Corporation insured limits.

Item 8. Financial Statements and Supplementary Data.

EnviroStar, Inc. and Subsidiaries

Index to Consolidated Financial Statements

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To Board of Directors and Stockholders of

EnviroStar, Inc. and Subsidiaries:
 

We have audited the accompanying consolidated balance sheets of EnviroStar, Inc. and Subsidiaries (the “Company”) as of June 30, 2017 and 2016, and the related consolidated statements of operations, shareholders’ equity, and cash flows for each of the years then ended. The financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audits included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of EnviroStar, Inc. and Subsidiaries as of June 30, 2017 and 2016 and the consolidated results of their operations and their cash flows for each of the years then ended, in conformity with accounting principles generally accepted in the United States of America.

/s/ EisnerAmper LLP

Fort Lauderdale, Florida

September 28, 2017

EnviroStar, Inc. and Subsidiaries

Consolidated Balance Sheets

(In thousands, except share and per share data)

The accompanying notes are an integral part of these consolidated financial statements

EnviroStar, Inc. and Subsidiaries

Consolidated Balance Sheets

(In thousands, except share and per share data)

The accompanying notes are an integral part of these consolidated financial statements

EnviroStar, Inc. and Subsidiaries

Consolidated Statements of Operations

(in thousands, except per share data)

The accompanying notes are an integral part of these consolidated financial statements.

EnviroStar, Inc. and Subsidiaries

Consolidated Statements of Shareholders’ Equity

(In thousands, except share data)

The accompanying notes are an integral part of these consolidated financial statements.

EnviroStar, Inc. and Subsidiaries

Consolidated Statements of Cash Flows

(In Thousands)

The accompanying notes are an integral part of these consolidated financial statements.

Item 9. Changes in and Disagreements With Accountants on Accounting and Financial Disclosure.

None.

Item 9A. Controls and Procedures.

Evaluation of Disclosure Controls and Procedures

As of the end of the period covered by this Report, management of the Company, with the participation of the Company’s principal executive officer and principal financial officer, evaluated the effectiveness of the Company’s “disclosure controls and procedures” (as defined in Rule 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (the “Exchange Act”)). Based on that evaluation, the Company’s principal executive officer and principal financial officer concluded that, as of June 30, 2017, the Company’s disclosure controls and procedures were effective to ensure that information required to be disclosed in the reports that the Company files or submits under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the rules and forms of the SEC and is accumulated and communicated to the Company’s management, including the Company’s principal executive officer and principal financial officer, as appropriate to allow timely decisions regarding required disclosure. 

The Company’s management, including the Company’s principal executive officer and principal financial officer, does not expect that the Company’s disclosure controls and procedures and internal control over financial reporting will prevent all errors and improper conduct. A control system, no matter how well conceived and operated, can provide only reasonable, not absolute, assurance that it will detect or uncover failures within the Company to disclose material information otherwise required to be set forth in the Company’s periodic reports or that the objectives of the control system will otherwise be met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of improper conduct, if any, have been detected. These inherent limitations include the realities that judgments in decision-making can be faulty and that breakdowns can occur because of simple error or mistake. Additionally, controls can be circumvented by the individual acts of some persons or by the collusion of two or more people. Further, the design of any control system is based in part upon assumptions about the likelihood of future events, and there can be no assurance that any such design will succeed in achieving its stated goals under all potential future conditions.

Management’s Report on Internal Control over Financial Reporting

The Company’s management is responsible for establishing and maintaining adequate “internal control over financial reporting” (as defined in Rule 13a-15(f) and 15d-15(f) under the Exchange Act). “Internal control over financial reporting” means a process designed by, or under the supervision of, a company’s principal executive and principal financial officers, and effected by the company’s board of directors, management and other personnel, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with accounting principles generally accepted in the United States of America (“GAAP”) and includes those policies and procedures that (i) pertain to the maintenance of records that in reasonable detail accurately and fairly reflect the transactions and dispositions of the assets of the company, (ii) provide reasonable assurance that transactions are recorded as necessary to permit the preparation of financial statements in accordance with GAAP, and that receipts and expenditures of the company are being made only in accordance with authorizations of the company’s management and directors and (iii) provide reasonable assurance regarding the prevention or timely detection of unauthorized acquisition, use or disposition of the company’s assets that could have a material effect on the company’s financial statements.

Because of inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, the projection of any evaluation of effectiveness to future periods is subject to the

risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies and procedures may deteriorate.

The Company’s management, with the participation of the Company’s principal executive officer and principal financial officer, evaluated the effectiveness of the Company’s internal control over financial reporting as of June 30, 2017. This evaluation was conducted using the criteria set forth by the Committee of Sponsoring Organizations (COSO) of the Treadway Commission in the 2013 Internal Control – Integrated Framework. Based on its evaluation, the Company’s management concluded that the Company’s internal control over financial reporting was effective as of June 30, 2017.

This Report does not include an attestation report of the Company’s independent registered public accounting firm regarding the Company’s internal control over financial reporting. Management’s report on internal control over financial reporting was not subject to attestation by the Company’s independent registered public accounting firm pursuant to the rules and regulations of the SEC that permit the Company to provide only its management’s report on internal control over financial reporting in this Report.

Changes in Internal Control over Financial Reporting

During the quarter ended June 30, 2017, there were no changes in the Company’s internal control over financial reporting that have materially affected, or are reasonably likely to materially affect, the Company’s internal control over financial reporting.

Item 9B. Other Information.

None.

PART III

Item 10. Directors, Executive Officers and Corporate Governance.

The information required by Item 10 of Form 10-K will be provided by incorporating the information required under such item by reference to the Company’s definitive Proxy Statement with respect to the Company’s 2017 Annual Meeting of Stockholders to be filed with the SEC no later than 120 days after the end of the fiscal year covered by this Report, or, alternatively, by amendment to this Report under cover of Form 10-K/A no later than the end of such 120-day period.

Item 11. Executive Compensation.

The information required by Item 11 of Form 10-K will be provided by incorporating the information required under such item by reference to the Company’s definitive Proxy Statement with respect to the Company’s 2017 Annual Meeting of Stockholders to be filed with the SEC no later than 120 days after the end of the fiscal year covered by this Report, or, alternatively, by amendment to this Report under cover of Form 10-K/A no later than the end of such 120-day period.

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters.

Equity Compensation Plan Information

The following table sets forth information, as of June 30, 2017, with respect to compensation plans under which shares of the Company’s common stock are authorized for issuance.

Other Information

The remaining information required by Item 12 of Form 10-K will be provided by incorporating the information required under such item by reference to the Company’s definitive Proxy Statement with respect to the Company’s 2017 Annual Meeting of Stockholders to be filed with the SEC no later than 120 days after the end of the fiscal year covered by this Report, or, alternatively, by amendment to this Report under cover of Form 10-K/A no later than the end of such 120-day period.

Item 13. Certain Relationships and Related Transactions, and Director Independence.

The information required by Item 13 of Form 10-K will be provided by incorporating the information required under such item by reference to the Company’s definitive Proxy Statement with respect to the Company’s 2017 Annual Meeting of Stockholders to be filed with the SEC no later than 120 days after the end of the fiscal year covered by this Report, or, alternatively, by amendment to this Report under cover of Form 10-K/A no later than the end of such 120-day period.

Item 14. Principal Accountant Fees and Services.

The information required by Item 14 of Form 10-K will be provided by incorporating the information required under such item by reference to the Company’s definitive Proxy Statement with respect to the Company’s 2017 Annual Meeting of Stockholders to be filed with the SEC no later than 120 days after the end of the fiscal year covered by this Report, or, alternatively, by amendment to this Report under cover of Form 10-K/A no later than the end of such 120-day period.

PART IV

Item 15. Exhibits and Financial Statement Schedules.

(1)       Financial Statements. The following consolidated financial statements of the Company and its subsidiaries are included in Part II, Item 8 of this Report.

Report of Independent Registered Public Accounting Firm

Consolidated Balance Sheets at June 30, 2017 and 2016

Consolidated Statements of Operations for the years ended June 30, 2017 and 2016

Consolidated Statements of Shareholders’ Equity for the years ended June 30, 2017 and 2016

Consolidated Statements of Cash Flows for the years ended June 30, 2017 and 2016

Notes to Consolidated Financial Statements

(2)       Financial Statement Schedules. All financial statement schedules have been omitted because the information is either not applicable or not required or because the information is included in the Company’s consolidated financial statements or the related notes to consolidated financial statements.

(3)       Exhibits. The following exhibits are either filed as a part of or furnished with this Report, or are incorporated into this Report by reference to documents previously filed by the Company with the SEC, as indicated below:

* The schedules and exhibits to this agreement are omitted pursuant to Item 601(b)(2) of Regulation S-K. The Company agrees to furnish supplementally to the SEC, upon request, a copy of any omitted schedule or exhibit.

** Indicates management contract or compensatory plan or arrangement.

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.